Hvordan justere Marker Ski Bindings

Hvordan justere Marker Ski Bindings

Ski bindinger er et utstyr av stadig høyere design og må justeres til riktig spenningsinnstilling (kjent som "DIN" -innstillingen). Markørbindinger har også typisk en "fore bak" -justering, noe som gjør at bindingen kan flyttes litt fremover og bakover for å maksimere skiytelsen. Hver av disse innstillingene er avgjørende for sikkerheten og ytelsen til en dag i bakken.

Hvordan justere Marker Ski Bindings

Trinn 1

Finn et Marker DIN-diagram. DIN-innstillingen justerer spenningen ved hvilken bindingen frigir støvelen. En stram innstilling - eller høyt tall - er for aggressive skiløpere, mens en lavere innstilling er for nybegynnere. Feil innstilling betyr at skiene kan slippe ut uventet eller ikke kunne slippe ut når det trengs. Enten kunne forårsake en dårlig krasj. Teknisk sett er DIN-innstillinger universelle på tvers av alle merker av bindinger, men ofte vil en erfaren skiløper finne at de trenger forskjellige DIN-innstillinger for forskjellige merker av bindinger. Marker publiserer produsentens DIN-diagram for sine bindinger, noe som bidrar til å eliminere gjetning. Marker DIN-diagrammet er enkelt å finne på nettet.

Steg 2

Kjenn din type ski. Vær ærlig; Hvis du går langsomt, trenger du dine bindinger til å løsne seg ganske enkelt hvis du faller - ellers risikerer du alvorlig skade.

Trinn 3

Sett din DIN. På Marker-diagrammet finner du høyde og vekt. Dette vil korrespondere med en brevkode på diagrammet. Hvis høyde- og vektbrevkoden er forskjellig, bruk den som er høyere opp på diagrammet som utgangspunkt (hvis høydekoden er "L" og vektkoden er "K", start med K). Se over diagrammet for oppstartslengden for en numerisk DIN-innstilling. Hvis du er en "I" level skier - eller en nybegynner - bruk den DIN innstillingen. Hvis du er en "II" nivå skiløper, bruk ett tall høyere. Så hvis DIN-innstillingen i oppstartslengdekolonnen var fem, bruk fem og en halv eller seks som din DIN. Hvis du er "III" level skier, gå to DIN innstillinger høyere. Still inn DIN-en med en skrutrekker for å justere skruene på forsiden og baksiden av bindingene.

Trinn 4

Kontroller fora-bakinnstillingen. Mange Marker-bindinger er på "skinner", noe som betyr at de kan løsnes og flyttes opp på skinnene nærmere skiens forside, eller gå litt tilbake. Avhengig av bindingen, kan den forreste innstillingen bli styrt av skruer i hæler og tær eller ved en låsemekanisme som kan skrues ut. Ikke overextender denne justeringen; Markørbindinger har vært kjent for å slippe ut hvis skruen som styrer forover-justering er bakket ut av hullet for langt. Det er best å lese online om dine spesifikke bindinger dersom du ikke er kjent med forankret justering.

Trinn 5

Sjekk bindinger hver gang du går på ski. Bindinger kan løsnes ved bruk, så sørg for at de er i riktig stilling hver gang du går på ski.
Hvordan justere Marker Ski Bindings

FAQ - 💬

❓ Are Marker bindings compatible with GripWalk?

👉 As of July 2021, GripWalk soles are defined by the standard ISO 23223 and are compatible with bindings that display the GripWalk logo or name, as well as MNC (Salomon/Atomic/Armada), ID (Marker) and AT (Tyrolia) bindings.

❓ Are Marker Griffon 13 bindings GripWalk compatible?

👉 Thanks to the ID sole, the binding is compatible with Alpine, AT, and GripWalk boot soles, so no matter what you are skiing on in terms of boots, the Griffon can accommodate your needs.

❓ How do you set ski Marker bindings?

👉 The adjustment screw is found in front of the binding near the surface of the ski, which is significantly easier to adjust than older models because it can be done with the boots engaged. Turn CLOCKWISE if you want to lower the AFD and COUNTER-CLOCKWISE to raise the height of the AFD.

❓ Can you adjust ski bindings for different size boots?

👉 Generally speaking, you can adjust your ski bindings the equivalent of one shoe size larger or smaller, but if you're going to be marking more significant changes (for example, in the case of a child whose feet are rapidly growing), the ski bindings will need to be remounted to ensure the ski boot is attaching at the ...

❓ How do you tell if my bindings are GripWalk?

👉 But if you haven't updated your ski bindings in a while, or they are not GripWalk compatible—indicated by the GripWalk logo stamped somewhere on the toe or if the binding has an adjustable anti-friction device (AFD)—you are putting yourself in harm's way every time you click in.

❓ Can you remove GripWalk from ski boots?

👉 You have 2 choices—replace the GripWalk sole on the boots with a standard sole OR replace the ski binding with a GripWalk equipped binding.

❓ How do I identify my GripWalk bindings?

👉 But if you haven't updated your ski bindings in a while, or they are not GripWalk compatible—indicated by the GripWalk logo stamped somewhere on the toe or if the binding has an adjustable anti-friction device (AFD)—you are putting yourself in harm's way every time you click in.

❓ Can you use regular ski boots with GripWalk bindings?

👉 I HAVE A GRIPWALK BINDING. CAN I STILL USE MY OLD TRADITIONAL ALPINE SKI BOOT? YES, your alpine boots can be used with GripWalk bindings as long as they are within the standard ISO norm 5355 alpine.

❓ Can I adjust my own ski bindings?

👉 First things first: you don't have to see a professional every time you want to adjust your ski binding. A little knowledge about the function of a ski binding provided, you can easily adjust it yourself. What you need to understand is how the binding works, which DIN setting you need, and how to calculate it.

❓ How tight should ski boots be?

👉 Ski boots should be as tight fitting as possible. You need minimal foot movement inside the boot. If your boot moves with your foot, your ski will move with your boot and in turn your foot. Allowing you to exert maximum control over your skis.

❓ How many times can you remount ski bindings?

👉 Most professionals would recommend not remounting a ski more than 3 times.

❓ What are the Marker bindings'settings?

👉 Marker bindings also typically have a "fore aft" adjustment, which allows the binding to be moved slightly forward and backward to maximize ski performance. Each of these settings is critical to the safety and performance of a day on the slopes. Find a Marker DIN chart. The DIN setting adjusts the tension at which the binding releases the boot.

❓ How do you adjust Marker bindings on a ski?

👉 Many Marker bindings are on "rails," meaning they can be loosened and moved up on the rails closer to the front of the ski, or slid back slightly. Depending on the binding, the fore aft setting might be controlled by screws in the heels and toes or by a locking device that can be unscrewed.

❓ How do I Find my Din for ski bindings?

👉 The Marker DIN chart is easy to find online. Know your type of skiing. Be honest; if you ski slowly, you will need your bindings to release fairly easily if you fall -- otherwise you risk serious injury. Set your DIN. On the Marker chart, find your height and weight. This will correspond to a letter code on the chart.

❓ How do I know if my Marker bindings are bad?

👉 Check the fore aft setting. Many Marker bindings are on "rails," meaning they can be loosened and moved up on the rails closer to the front of the ski, or slid back slightly. Depending on the binding, the fore aft setting might be controlled by screws in the heels and toes or by a locking device that can be unscrewed.

Del:
Gitt Noen Kommentar